Do you know the characteristics of panel office furniture?

Do you know the characteristics of panel office furniture?

The panel office furniture has become a new family in the office furniture category with its fashionable style, bright colors, clear wood grain and no deformation, no cracking, anti-mite and moderate price. The correct selection of panel office furniture should pay attention to the following five elements:

Do you know the characteristics of panel office furniture?
  1. Surface quality panel office furniture is based on wood-based panels such as particleboard and medium-density fiberboard. The surface is decorated with melamine, pvc, wood veneer and paper grain. The pattern resembling wood grain is clear and natural, smooth and flat. , has a good visual effect and feel. When purchasing, mainly look at the surface of the sheet for scratches, indentations, bubbling, degumming and peeling marks and other defects; whether the wood grain pattern is natural and smooth, do not have the feeling of artificial creation; for symmetric office furniture, more attention should be paid The consistency and coordination of the color and texture of the board makes people feel that the symmetrical board is like a piece of material.

Second, the production of quality plate-type office furniture in the production of the formed plate type through the cutting saw, decorative edge banding, component assembly and combination. The quality of its production mainly depends on the quality of the cutting saw, the quality of the edge and surface decoration and the quality of the plate port. The board for making panel office furniture has quality requirements for the flatness, verticality and angle of the panel parts in the cutting saw. Generally speaking, the cutting technology of the sheet is within 0.01 mm per meter, and the sheet of precision is required. After the saw, the profile is flat and the angle is good. After the office furniture is made, there will be no tilting of the plate. The precision of the saw blade in the sawing also affects the quality of the port and end edge of the panel, and the sawing defects such as scratches, chipping, and sag angles also affect the appearance quality of the panel office furniture. The side and surface decoration mainly depends on whether the rubber on the decorative parts is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, and whether the port of the visible parts such as the door, the door panel, the drawer panel and the lower mouth are sealed, and the decoration is excellent. The edge of the sheet can not touch the traces of the bond. Assembling the combination mainly depends on whether the port at the drilling hole is exquisite and tidy. Whether the connector is firm after installation, whether there is a gap between the plane and the port after the T-slot is connected, whether there is looseness by hand. Whether the gap between the door and the drawer is too large, it is generally required to be between 1-2mm, and whether the opening and pulling of the door and the drawer are flexible and free.

Third, the quality of metal parts, plastic parts of the office furniture are used metal parts, plastic parts as fastening connectors, so the quality of metal parts also determines the quality of the plate office furniture. The metal parts are required to be dexterous, smooth, and surface-plated, and there is no rust, burr, etc., and the precision of the fittings is higher. The plastic parts should be beautiful in appearance and bright in color. The parts of the force in use should have strength and elasticity, and should not be too thin. The open type connector requires flexible rotation, and the spring inside is tightly fitted, so that the office furniture will be smooth, easy and frictionless during the opening and use process.

Fourth, the main size panel office furniture is currently mainly based on complete sets of bedroom furniture and office furniture. There are also multi-functional TV and TV cabinets and other products. National standards for the main dimensions (and functional dimensions) of office furniture are required. For example, the height of the office furniture in the table is 680-760mm, and the middle clearance height from the lower edge of the middle drawer of the writing desk to the ground should be 580mm or more, and the clearance height between the bookcase layers should be 520mm or more. The above main dimensions, please pay attention when purchasing, because office furniture is less than the specified size, it will bring a lot of inconvenience when used, affecting the use of office furniture.

V. Formaldehyde release plate type office furniture is generally based on particleboard and medium density fiberboard. The national standard for the amount of formaldehyde released in the board is specified. The release amount of formaldehyde in the particleboard is specified to be less than or equal to 50 mg per 100 g, and the formaldehyde emission of the medium density fiberboard is less than or equal to 40 mg per 100 g.

What are the characteristics of modern office furniture?

What are the characteristics of modern office furniture?

Modern office furniture has become a new family of office furniture because of its novel style, bright color, clear wood grain, no deformation, no cracking, anti-mite and moderate price. Attention should be paid to the following five elements: surface quality panel furniture is mainly made of particleboard and medium density fiberboard, and the surface is decorated with melamine, polyvinyl chloride, firewood and pulp. The wood grain pattern is clear, smooth and smooth.

This modern office has a good visual and feel. When buying and purchasing, we check the quality of modern office furniture mainly to see if there are scratches, indentations, bubbling, degumming, skin and glue marks on the surface. Whether the wood grain is natural and smooth, there is no artificial feeling. For symmetrical office furniture, you should pay more attention to the color, consistency and coordination of the board surface, and the symmetry board is like a piece of material.
 
The high-quality modern office furniture in production is made up of saws, decorative edges and parts assembly. The quality of the cut depends primarily on the quality of the saw, the quality of the edges and surfaces of the saw, and the quality of the splice. Modern office furniture panels have quality requirements for the flatness, verticality and angle of the panels when sawing.

What are the characteristics of modern office furniture?

In general, the cutting technique of the sheet is within 0.01 mm/m. The blade has a smooth edge and a good angle. After the furniture is finished, the plate will not tilt. The precision of the saw blade in the sawing process will also affect the quality of the end face of the plate. The scratches, hem, chamfering and other cutting and sawing defects of the plate will also affect the appearance quality of the office furniture.
 
One side and surface decoration mainly depends on the decorative part evenly coated on the decorative part, the combination is strong, the trimming is smooth, part of one side, house number, drawer panel, lower mouth and other visible part port seal, and exquisite Decorative panels can’t touch the traces of bonds.
 
The assembly of the assembly is mainly to see if the port is beautiful and tidy. After the connector is installed, it is firm. After connecting the plane and the port, there is no gap between the T-joints and no manual release. The gap between the door and the drawer is too large. Generally required to be between 1-2mm, the opening and closing of doors and windows is flexible.

Copyright Provide information about the best modern office furniture 2019
Shale theme by Siteturner